Location：Home > Products > Extruder > Single Screw Extruder >
Single screw extrusion machine is mainly used in the production of large diameter pipe material, production of pipe is widely used in water pipe, gas pipe, chemical pipe, large diameter in aspects of agricultural irrigation and people's life for pipes, drains and other special purposes.
1. Adopting high speed screw, high yield, high efficiency.
2. The speed adjustment way: ABB/Siemens frequency control of motor speed, high and low speed screw also smoothly.
3. The temperature control table: Japan omron/RKC waalwijk, temperature control precision.
4. The machine barrel screw material: 38 crmoala nitriding processing.
5. The heater: cast aluminum (with fan cooling, stainless steel shell)
6. Reducer: changzhou machine of decelerate of hard tooth surface gear
7. The two sets of mould, can produce 20-160 PE pipe.
|
product name |
length to diameter ratio L/D |
production |
screw rotation speed |
Driving power |
Center for high |
|
SJ-45/33 |
33:1 |
10-30kg/h |
20-120r/min |
18.5kw |
1000mm |
|
SJ-50/33 |
33:1 |
20-80kg/h |
12.5-130r/min |
37kw |
1000mm |
|
SJ-65/33 |
33:1 |
80-150kg/h |
33-130r/min 20-120r/min |
45kw 55kw |
1000mm |
|
SJ-75/33 |
33:1 |
120-280kg/h |
20-120r/min |
75kw 90kw |
1000mm |
|
SJ-90/33 |
33:1 |
150-450kg/h |
33.3-110r/min |
110kw 160kw |
1000mm |
|
SJ-120/33 |
33:1 |
300-600kg/h |
20-100r/min |
260kw |
1200mm |
|
SJ-150/33 |
33:1 |
450-700kg/h |
7-80r/min |
315kw |
1200mm
|
In the previous：第一頁(yè)
The next article：Single Screw Extruder
